 |
 |
 |
 |
 |
 |
Before:
After:
Justins S-10 back for bags on 20's. Were laying this truck out using
Airlift 2b6 bags in the front and Airlift sleeve bags in the rear, Airlift
digital controller. Reversed wishbone 3-link, 2 Viair 380c comps. 5
Gallon tank, 1/2" line, 3/8" Smc valves, CTC front shock mounts.
Were keeping the heat and a/c and putting wheel tubs in front and rear.
We've also stripped the ground effects, fender flares and bumper cover.
|
 Modified upper control arms to get the proper ball joint angles to lay on 20's. |
|
 Pass. firewall tub |
 |
 Driverside firewall cut and harness relocated |
 |
 |
 |
 |
 Before blasting |
 After Blasting. The difference is like night and day. Its the perfect surface to lay down a solid weld. And primer sticks like glue. |
 Custom wishbone |
 Fully Tig welded joints for strength |
 |
 |
 |
 |
 |
 |
 |
 126 rivets installed through the notch and tubes. 98 of which are polished. |
 |
 |
 |
 Firewall painted to match |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|