 |
||||||
 S-10 Chassis is being setup for 20 inch wheels. Tubular upper and lower control arms. Crazy Talk Customs shock mounts for lock to lock steering. Raised gas tank crossmember, reverse triangulated leverage 4-link, 2b6 ext bags for the front and 2b7 for the rear. 5 gallon tank, 8 3/8" E air valves, 10 switch box, dual needle gauges, 2 Viair 450 compressors, 1/2" line.... I'll throw some more pictures up soon. |
||||||
|
|
 Rearend is mocked up and notches are welded in. |
 Frame is boxed between the notch and the rear crossmember. |
 Frame gets around 11 inches of lift |
 |
 |
 Just a little something I threw on there. It looks pretty good if I do say so myself. |
 |
 After everything was finish welded both top and bottom. I tore the frame back apart and sandblasted it clean. Its the best way to get a uniform clean surface that is ready for primer. |
 |
 |
|
Look
for the S-10 to be rolling to a show near you sometime later this summer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
