 |
 |
 |
 |
 |
 |
07 Escalade in for bags on 26's keeping the AWD. We did a true cantilever front suspension, bags over axle in the rear. new 4-link bars and panhard, Oasis XD 3000 compressor, Easy St digital controller, 8- 3/8" smc valves, 1/2" line. 8.5 gallon tank, tubular upper control arms with uni balls. Were going out on a limb and are saying this is the only 07 Escalde in the country with a cantilevered front suspension keeping the AWD.
|
 Stock |
 TIG Welded the mis alignment spacer to the cast spindle. |
|
|
 |
 |
 Tig welded for strength |
 |
 Lengthened over stock |
 We ran 1/0 gauge wire from compressor to one of the 4 auxillary batteries for the stereo under the hood. |
 |
 |
 |
 |
 |
 Solid machined bushing with greasable zerks mounting tabs are built from 3/8" plate and are vertically gooseted on both sides for strength. |
 |
 Still has shocks, still has AWD. Generates 10 inches of lift from full drop. |
 Bags are mounted between front engine crossmember and radiator core support. |
 Fsx 3/4" Heim joints joined to 1.5" 1/4 wall DOM tubing |
 Ride height has full lock to lock turning no rub at this height. 72 psi in the front 37 psi in the rear. Rides like a Cadillac |
|
|
 Full Lift |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|