 |
 |
 |
 |
 |
 |
04 Ranger in for bags on 20's plans are to lay this truck out on the engine crossmember and keep the a/c with the 20's . Plans are for a forward facing triangulated leveraged 4-link, moderate tube work, 20 gallon fuel cell, 5 gallon tank, 2- Viair 380 comps, 10 switch box, 8 asco valves and custom made tubular control arms.
 Like everything we start off with fresh steel. A quick trip out to our blasting site and were ready to cut and weld this up. |
 Fully tig welded the inside and outside of the step notch. |
 |
 |
 Forward facing 4-link is in and the start of the tube work has begun. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 Our control arms next to Djm and Stock control arms. Which would you choose. |
 1 1/4" 1/4"wall DOM tube, built for bags to lay on 20's. You need a set let us know. |
 |
 All painted, wired, plumbed, just need to finish the fuel cell and the bed goes back on. |
 Fuel cell we made. 20 gallons uses the stock fuel pump and sending unit . |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|