 |
 |
 |
 |
 |
 |
81 C10. You may remember this truck from
a little while back when we put some monster rear tubs in it and shaved
the firewall. Its back and looking to get a air ride setup installed.
Plans are for a forward facing wishbone 3-link with bags on lower bars.
5 gallon tank, Viair 480 Compressors, Slam Re 7 bags, 3/8" Asco
valves. Setup to lay 22/24 combo.
|
 |
 Huge notch setup to lay 24's |
 |
 Front crossmember, lower link bars and lower bag mounts built and in place. We'll bend the upper bars to fit around the bags |
 |
 |
 Wishbone 3-link, bags on bars, still have a few tubes to put in before its all finished up. |
 Notched the floor for driveshaft clearance. Bead rolled the panel to give it some strength. |
 New trans crossmember we built |
 Stepped Lower control arms. Radiused humps for bag clearance. |
 |
 Blasted the rearend and link bars. |
 |
 |
 rearend wishbone and lower link bars are base coat clear. Back half is single stage semi flat. |
 |
 Real clean functional setup. Generates 12 inches of lift without the shocks 11" with the shocks. Will lay a 30" tall tire |
 Still needs a Z, sectioned crossemember or raised crossmember to lay truely flat. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|